Applies to: VMware ESX / ESXi 4.x | IBM System x3850 X5 | Intel 82576 / 82580 Gigabit Ethernet Controllers
Historical: This article covers a legacy ESX/ESXi 4.x driver installation scenario for Intel 82576 and 82580 Gigabit Ethernet controllers, including the IBM I340-T4 adapter used in IBM System x servers such as the x3850 X5.
In this configuration, the network adapter could be supported by VMware but the required igb driver was not included in the ESX/ESXi installation media. The driver therefore had to be installed separately from an offline bundle.

In This Article
- 1. Driver Package
- 2. Prepare the ESX Host
- 3. Install the Driver
- 4. Reboot and Verify
- 5. Important Version Note
- 6. Key Takeaways
1. Driver Package
The original installation used the Intel igb 2.1.10.2 offline bundle:
INT-intel-lad-ddk-igb-2.1.10.2-offline_bundle-268793.zip
This package was intended for ESX/ESXi 4.x. Do not try to install this bundle on later ESXi releases.
2. Prepare the ESX Host
- Upload the offline bundle to a datastore or local path on the ESX/ESXi host.
- Shut down or migrate virtual machines from the host.
- Place the host into Maintenance Mode.
- Enable SSH if you plan to install the bundle from the ESX/ESXi command line.
3. Install the Driver
On ESX/ESXi 4.x, the legacy esxupdate command can install the offline bundle:
esxupdate --bundle=INT-intel-lad-ddk-igb-2.1.10.2-offline_bundle-268793.zip update
Run the command from the directory that contains the bundle, or provide the full path to the ZIP file.
4. Reboot and Verify
- Reboot the ESX/ESXi host after the driver installation completes.
- Reconnect with the vSphere Client.
- Confirm that the Intel network adapters are now detected.
- Verify the physical NICs under the host networking configuration.
- Exit Maintenance Mode after validation.
5. Important Version Note
This driver bundle is specific to the ESX/ESXi 4.x driver model. A VIB from this package is not valid for newer ESXi releases such as ESXi 5.x.
Later ESX/ESXi 4.x updates also shipped newer Intel igb driver versions, so always check the installed driver level before applying an additional offline bundle.
6. Key Takeaways
- This procedure applies to a legacy ESX/ESXi 4.x Intel igb driver scenario.
- The original IBM I340-T4 adapter used Intel 82576-class Gigabit Ethernet hardware.
- Place the host in Maintenance Mode before installing the offline bundle.
- Reboot and verify that the physical NICs are detected after the driver update.
- Do not reuse the ESX 4.x driver bundle on newer ESXi versions.
References
- IBM – Networking and Communication Accessories for System x3850 X5
- Fujitsu – VMware ESX 4.1 Setup Guide and Intel igb Driver Notes

I’m a Cloud Solution Architect – Global Delivery at Microsoft, working within the Modern Work team. My areas of expertise include Exchange Server (on-premises), Exchange Hybrid, Exchange Online, Microsoft 365, security, identity, and enterprise infrastructure.



